We intend to offer consultancy and detailed engineering services required for some exclusive deliverables listed below typically for the indicated industry segments. We also intend to offer these services to small and medium scale enterprises, where in the concepts involved in large industries can be applied to SME, to suit their specific requirements if any

Completed Projects

1.Project Name: Design review and project monitoring of Instrumentation and control works of 40 MLD Sewage Treatement Plant of BWSSB at Doddabele, Bangalore

Client: M/s STUP Consultants, Bangalore (www.stupco.com). STUP were the overall Consultants to BWSSB, Bangalore

Main Project Name: 40 MLD Sewage Treatement Plant of Bangalore Water Supply & Sewage Board at Doddabele, Bangalore

STUP's Client: Bangalore Water Supply & Sewage Board

EPCC Contractor:Triveni Engineering & Industries Limited, Noida (TEIL)

This project was awarded by STUP Consultants, Bangalore to IndustriConnect Technologies (ICT) as their sub consultants for the review and project monitoring of I&C works as follows:

(A) Review and approval of drawings and documents prepared by M/s TEIL

• PLC I/O list
• Instrument schedule
• Cable schedule
• Instrument hook up
• PLC System configuration
• Block diagram of CCTV & EPABX system
• Control Philosophy
• Technical datasheets (Control & Instrumentation)
• Vendor data sheets of instruments
• Vendor GA, GN, Power & Control wiring & BOM for PLC panels
• Vendor data sheets of instrument cables
• Vendor drawings for Junction box/IPDB
• Vendor drawings for EPAX system
• Vendor drawing for CCTV system
• Review of as built drawings
• P&I Diagram
• Tagging philosophy
• Instrument loop diagram
• Logic diagrams
• Control room layout drawing
• HMI/SCADA and graphics
• Sizing of flow elements
• Sizing of Control valves
• FAT (Factory Acceptance Test ) Procedure (For vendor works)
• Inspection of instrumentation equipment at TEIL's vendor works
• Attending FAT at PLC/SCADA vendor's works
• SAT (Site Acceptance Test ) proceudre (For STP site)
• Visit to project site and visit to vendor works

(B) Inspection works at Instrumentation vendor's works

• Electromagnetic flowmeters at M/S Khrone Marshal, Pune
• Level instruments, at M/s Techtrol, Pune
• Pressure gauges at Gauges Bourdon, Mumbai
• Processing Inspection waiver of balance instruments

(C ) Attending FAT at PLC/SCADA vendor's works

• PLC/SCADA system at M/s Powertech, Sonipat, New Delhi

(D) Site supervision (If required)

2.Project Name: Engineering services for Preparation and review of the Instrumentation & Control drawings/documents for IOCL-TAS project, Navi Mumbai

Client: M/s ABB, Bangalore (www.stupco.com). ABB were the overall EPCC Contractors to IOCL

Main Project Name: IOCL-Terminal Automation System project, Navi Mumbai

ABB's Client: Indian Oil Corporation Limited, Navi Mumbai

This project was awarded by ABB Bangalaore to IndustriConnect Technologies (ICT) as their vendor for providing the Engineering services for Preparation and review of the Instrumentation & Control drawings/documents for IOCL-TAS project, Navi Mumbai as follows:

Preparation of Documents

• 1 Instrument Index
• 2 P&ID
• 3 Instrument Data sheets
• 4 Cable schedule
• 5 Junction Box schedule
• 6 Hook up drawings
• 7 Loop diagrams
• 8 Cable layout

Tender scrutiny of vendor's offers

• Metering system
• Skids
• Loading arm
• Gas dispersion system
• Fire detection system
• Vapour recovery arm
• Level Switch
• Barrier Gate

Vendor document review post order placement

• Metering system
• Skids comprising of all in line equipments and electronics
• Bottom Loading arm
• Gas dispersion system
• Fire detection system
• Vapour recovery arm
• On/Off valves
• DBBV (Double block and bleed valves)
• Strainer cum air eliminator
• Master meter skid
• Ball valves
• Non-return valves
• Rack monitor
• Density probe
• Display units
• Digital Control Valves
• Batch Controller
• Level Switch
• Barrier Gate
• Meter Prover with Master Meter Skid

Ongoing Project

1.Project Name: Design & Engineering of the Instrumentation & Control system for Water supply to villages in Kustagi & Yelburga taluk.

Client: M/s STUP Consultants, Bangalore (www.stupco.com). STUP were the overall Consultants to M/s L&T Construction, Water & Effluent IC, Chennai

Main Project Name: Design, Build, Operate & Transfer of Multi Village Drinking water supply scheme to all Habitations of Kushtagi and Yelburga taluks of Lkoppal district under DBOT

Main Project Name: Design, Build, Operate & Transfer of Multi Village Drinking water supply scheme to all Habitations of Kushtagi and Yelburga taluks of Lkoppal district under DBOT

EPCC Contractor: L&T Construction, Water & Effluent IC

L&T's Client: Rural drinking water & sanitation department, Bangalore, Karnataka

STUP's Client: L&T Construction, Water & Effluent IC

This project was awarded by STUP Consultants, Bangalore to IndustriConnect Technologies (ICT) as their sub consultants for the Design & Engineering of the Instrumentation & Control system for Water supply to villages in Kustagi & Yelburga taluk as follows:

(A) Preparation of drawings / documents

• Tagging philosophy
• PLC I/O list
• Instrument schedule
• Cable schedule (For field instruments)
• Instrument hook up
• PLC System configuration (Basic scheme for including in PLC/SCADA tender document)
• Block diagram of CCTV & EPABX system
• Control and operation Philosophy for individual location and integrated for the entire scheme
• Technical specification for instruments and control system for vendor enquiry
• Technical datasheets (Control & Instrumentation)
• P&I Diagram
• Instrument loop diagram
• Block Logic diagrams
• Control room layout drawing (Tentative for indicating to PLC vendor)
• HMI/SCADA and graphics sketches (for giving to SCADA vendor)
• BOM and guidance estimate for the works
• Leak management system
• Preparation of as built drawings (Limited to ICT scope as above)

(B) Vendor drawing approval

• Function Design Specifications furnished by PLC/SCADA vendor
• Equipment layout in Control rooms
• Vendor data sheets of instruments
• Vendor GA, GN, Power & Control wiring & BOM for PLC panels
• Vendor data sheets of instrument cables
• Vendor drawings for Junction box/IPDB
• Vendor drawings for EPAX system
• Vendor drawing for CCTV system
• Sizing of flow elements
• Sizing of Control valves
• Review of as built drawing prepared by others
• FAT (Factory Acceptance Test ) Procedure
• SAT (Site Acceptance Test ) proceudre